The APEXS Slide-Lock sliding D-ring allows the diver to easily change the position of the cylinders as their buoyancy changes during the dive. No need to clip your cylinder on and off, simply adjust the position of the D-ring during your dive. The 2-piece plate system is adjustable to nearly any torso length, making this truly a one size fits all system.
The WSX has individual webbing sections rather than one long piece running through the harness, which allows the complete system to be quickly and easily adjusted. The bladder is constructed from Armoguard, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard Cordura (the material used on many other side-mount harness bladders), making this a wing designed with serious side-mount diving in mind. The WSX Side-Mount Harness System is available in two lift capacities of 25 lbs.(11.3 kg and 20.4 kg). The Armoguard exterior has additional protective layer of Armoguard protects the bladder against abrasions in confined spaces. Unit has a reversible WTX K style w/ brass buttons inflator so it can be mounted on left or right side. Inflator comes with a 3/8 threaded low pressure quick-disconnect hose. Trim while diving is provided by 1 flat valve - lower center and 2-moveable on left side, right side or upper left shoulder. Grommets at lower corners allow for mounting bungee to keep the bladder streamlined to your body. The harness has solid 2" (5cm) webbing that comes pre-assembled, removable crotch strap made of 2" (5cm) soft webbing, 4 2" (5cm) stainless steel D-rings (2 angled on shoulders, 1 angled and 1 flat on the crotch strap), 2 - Slide-Lock" sliding stainless steel D-rings on waist strap allow for easy adjustment of cylinders throughout the dive, and 2 stainless steel drop D-rings along the lower back are for the included butt pack, marker buoys, reels or other accessories. Harness system has a heavy-duty waist buckle made of stainless steel, 2-piece stainless steel plate allows the torso length to be adjusted to fit any diver and zippered butt pack with stainless steel snap hooks included.
The non-releasable weight pouches are mounted on the spine strap and accommodate 18lbs. Comes complete with two sizes of bungee and five stainless steel bolt snaps. Two grommet strips allow the diver to adjust the weight pouch and bladder based on their specific requirements.
APEKS WSX Side-Mount Harness System. Top-of-the-Line Side Mount Harness System. Feature Rich, Complete Side-Mount Harness System.Comes w/Bladder, Harness w/Crotch Strap, D-Rings, Bungee & Accessory Butt Pack. D-Ring Allows Diver to Easily Change Position of Cylinders as Buoyancy Changes. No Need to Clip Cylinder On-and-Off. Simply Adjust Position of D-Ring During Dive. 2-Piece Plate System is Adjustable to Nearly Any Torso Length. Individual Webbing Sections Not One Long Piece Running Thru-Harness. Webbing: Allows Complete System Quick and Easily Adjustment.
Armoguard: Super-Tough Material Normally Found in Public Safety & Military Dive Products. Smooth Material 10 X More Abrasion Resistant than Standard Cordura. Armoguard Exterior: Additional Protective Layer Protects Bladder in Confined Spaces. Wing Designed w/Serious Side-Mount Diving-in-Mind.
Available in Two Lift Capacities: 25 lbs. Reversible WTX K Style w/Brass Buttons Inflator. Inflator: Can be Mounted On-Left-or-Right Side. 3/8 Threaded LP Quick Disconnect Hose.
Trim: 1 Flat Valve - Lower Center & 2-Moveable on Left Side, Right Side or Upper Left Shoulder. Grommets: Lower Corners Allow for Mounting Bungee for Low-Profile Bladder.Harness System: Solid 2" (5cm) Webbing Pre-Assembled Removable Crotch Strap Made of 2" (5cm) Soft Webbing 4 2 (5cm) Stainless Steel D-Rings; 2 Angled on Shoulders 1 Flat on Crotch Strap. Harness System Continued: 2 Stainless Steel Drop D-Rings Lower Back for Butt Pack, Marker Buoys, Reels or Other Accessories Heavy-Duty Stainless Steal Waist Buckle Zippered Butt Pack w/Stainless Steel Snap Hooks. Non-Releasable Weight Pouches Mounted on Spine Strap.
Two Sizes of Bungee and Five Stainless Steel Bolt Snaps. Two Grommet Strips Allow Diver to Adjust Weight Pouch and Bladder. (11.3 kg or 20.4 kg). 1 Flat Valve - Lower Center & 2-Moveable on Left Side, Right Side or Upper Left Shoulder. Yes, Webbing w/Stainless Steel Latch Style Buckle.
Feedback is a very powerful tool. It gives sellers a reason to conduct business at the highest level of honesty & respect. Many years ago Leisure Pro was the first Internet-based divers supply company. We're still the number one store for scuba diving and snorkeling equipment.
Thousands and thousands of satisfied customers swear by our service. Hours: Mon-Thu: 9:30-5:30, Friday: 9:30-12:30. Please do not request to have an item relisted if you do not see it any more. If we are able to relist, we will do so even without your request.We will not mark any package as a gift. You will get that automatically. We won't even ask why you've changed your mind.
Please allow 2 days from the date we received the package for us to process your return. Ate we received the package for us to process your return.The item "Apeks WSX Side-Mount Harness System" is in sale since Tuesday, January 26, 2021. This item is in the category "Sporting Goods\Water Sports\Scuba & Snorkeling\Buoyancy Compensators". The seller is "leisurepro" and is located in Elizabeth, New Jersey. This item can be shipped to United States.