The Cressi Solid Scuba Package is just what you're looking for. The Solid BCD is a fantastic Jacket style BCD that provides plenty of lift. This durable BCD has two zippered pockets and multiple D-rings for storage and attachment of accessory items with two 1 (25mm) techno polymer D-rings on the pockets. The BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell.
All three can be manually dumped two with pull cords and the other with the power inflator mechanism. If used at dive facilities a size indicator is highly visible on the right shoulder.BCD adjustable sternum strap along with both 2 (50mm) torso adjustment straps and waist strap are all equipped with squeeze-style side-release buckles for easy donning and doffing. The light-weight back support is rigid for proper cylinder stability but is fully padded for comfort and the ridged backpack is equipped with a grab handle for easy transport and gear donning assist.
BCD is built to last made from 500D Cordura (exterior part) and 420D nylon (interior). The Cressi Solid BCD has the following lift capacities according to size: XXS 17.6 lbs. (8 kg), XS 26.5 lbs.
(12 kg), SM 30.9 lbs. (14 kg), MD 35.3 lbs. (16 kg), LG 41.9 lbs. (19 kg) and XL 48.5 lbs.The Cressi Solid BCD come with a 3/8 threaded quick-disconnect low-pressure hose and owner's manual. The XS Compact AC2 Regulator is an exceptionally dependable non-balanced flow-by-piston designed 1'st stage regulator that is a great choice as a new diver's rig, or for use as a stage bottle regulator system. This simple yet fail-safe design will deliver air even if there is a first stage failure. The 1'st stage has 1 high pressure (HP) 7/16" threaded port and 4 low pressure (LP) 3/8" threaded ports and is made from marine grade chromed brass for long life and durability. A conical filter is used which has greater surface area for higher air flow characteristics through the 1'st stage regulator. The XS Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2'nd stage comes with a flow deviator that acts on the venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2'nd stage and a comfortable silicone mouthpiece for breathing comfort.
The XS Compact AC2 Regulator weighs 35 oz. (994 g) with hose and comes with an owner's manual. The XS Compact Second-Stage Octopus housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The 2nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2'nd stage and a comfortable silicone mouthpiece.The XS Compact Regulator comes with a long 39" (100cm) 3/8" hose and owner's manual. The Cressi Mini-Manometer Pressure Gauge luminescent dial reads from 0 to 5000 psi. For at-a-glance monitoring of air pressure the instruments face is divided into three different colored zones: 600 psi and below is highlighted in red with a solid bar and red stripes.
If gauge is used on deeper dives, the red scale extends and fades to 1,300 psi, this provides for added reserve air indication required at greater depths. From 600 to approximately 3,000 psi is green and from 3,000 to end of scale is blue.
The front glass lens is made to act as a pressure relief valve. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape. The instrument is housed in a small, modern shaped boot, made from polycarbonate and Desmopan, (a thermoplastic polyurethane) two materials that guarantee protection from shocks, scratches and which, at the same time, is very lightweight.
The pressure gauge housing is durable chrome plated brass. The gauge boot has an attachment point for a clip or lanyard. Pressure gauge is equipped with a 7/16 threaded high-pressure hose. The instrument console is made in Italy. The item "Cressi Solid Scuba Package size XL" is in sale since Thursday, June 17, 2021.
This item is in the category "Sporting Goods\Water Sports\Scuba & Snorkeling\Buoyancy Compensators". The seller is "majblade2" and is located in Florida . This item can be shipped to United States.