Scuba Buoyancy Compensator

Cressi Start Equipment for Scuba Diving

Cressi Start Equipment for Scuba Diving

Cressi Start Equipment for Scuba Diving    Cressi Start Equipment for Scuba Diving

Cressi Start Equipment for Scuba Diving. Start BCD, XS2/AC2 Regulator, XS Octopus, Mini 2 Gauge Console, HP & LP Hoses, Owner Manuals. If you're looking for a durable, strong and almost bulletproof BCD jacket than the Start is what you are looking for.

Constructed from extremely Strong 500 and 1000-Denier Cordura, with excellent buoyancy, even on smaller sizes the Start full jacket BCD fits the bill. Designed with the demanding use of dive training and rental facilities in mind this BCD will give the sport diver years of dependable use. The BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell. All three can be manually dumped two with pull cords and the other with the power inflator mechanism. There are two plastic D-rings and two additional snap hooks for attachment of instruments and accessories.

If used at dive facilities a size indicator is highly visible on the right shoulder. BCD has two large accessory storage pockets with hook and loop closures, and the adjustable sternum straps along with both torso adjustment and waist straps are equipped with squeeze-style side-release buckles for easy donning and doffing. The waist strap/cummerbund assembly is independently suspended from the air cell allowing the air cell to inflate away from the diver preventing the squeeze-effect when inflated. The backpack is rigid for support and stability of the cylinder yet is fully padded for comfort. The Cressi Start BCD come with a 3/8 threaded quick-disconnect low-pressure hose and owner's manual.

/ kg / size 29.2 lbs. / 13.3 kg / XS 31.5 lbs.

/ 14.3 kg / S 33.7 lbs. / 15.3 kg / M 38.1 lbs.

/17.3 kg / L 44.9 lbs. / 20.4 kg /XL The XS2/AC2 Regulator is an exceptionally dependable non-balanced flow-by-piston designed 1'st stage regulator that is a great choice as a new diver's rig, or for use as a stage bottle regulator system. This simple yet fail-safe design will deliver gas even if there is a first stage failure. The 1'st stage has 1 HP 7/16" threaded port, 4 LP 3/8" threaded ports and is made from marine grade chromed brass for long life and durability. A conical filter is used which has greater surface area for higher air flow characteristics through the 1'st stage regulator.

The XS2 Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance.

The 2'nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Regulator comes with a comfortable silicone mouthpiece. The XS2 Compact AC2 Regulator weighs 35 oz.

(994 g) with the hose and comes with an owner's manual. Regulator is certified to EN250/2000 standards and is made in Italy. The XS Octopus is a lightweight, high performance second stage regulator.

The XS has a Venturi dive/pre-dive switch which will help control the sensitivity of the regulator when not in use, yet when switched from the pre-dive to dive position the regulators performance will instantly increase. The XS Octopus has a dependable downstream demand valve mechanism for reliable performance.

The XS Octopus is equipped with a 33" (84cm) 3/8" threaded hose, has a yellow front cover for easy identification in an out-of-air-emergency. The regulator has a soft and comfortable liquid silicone mouthpiece and the housing is made of durable impact resistant hi-tech polymers.

The regulator weighs 7.27 oz. (206 g) without the hose and 12.7 oz.

(359 g) with the hose. Regulator is certified to Annex B EN 250.2014 standards. The Cressi Mini-Console 2 is a small compact console that houses the Cressi Mini-Manometer Pressure Gauge and a new, small, analog depth gauge.

Both gauges are high-quality instruments with chrome plated brass cases and the depth gauge has a diaphragm membrane actuated function. Both gauges have a large circular easy-to-read scale. The instruments are housed in a small, modern shaped console boot, made from polycarbonate and Desmopan, (a thermoplastic polyurethane) two materials that guarantee protection from shocks, scratches and which, at the same time, is very light.

At the end of the console, slightly to the sides, there are two eyelets for fastening the instrument to the BCD or harness with a clip or lanyard so that it does not hang down with the risk of catching and damaging the environment or the instruments. The luminescent face of the 230' depth gauge, the first 40' of depth readings are in 10' increments, (which correspond to the area of decompression stops) and are widely spaced for ease-of-reading.

For at-a-glance monitoring of depth, the face is divided into 3-different colored zones: Green up to 66', light-blue from 66' to 130' and red from 130' to the end of the scale. The instrument has a maximum depth indicator that stops on the maximum depth reached during the dive. This function is extremely handy for logging of dive information. The Mini-Manometer Pressure Gauge luminescent dial reads from 0 to 5000 psi. Like the depth gauge the instruments face is divided into three different colored zones for at-a-glance monitoring of air the area from 600 psi and below is highlighted in red with a solid bar and red stripes.

If gauge is used on deeper dives, the red scale extends and fades to 1,300 psi, this provides for added reserve air indication required at greater depths. From 600 to approximately 3,000 psi is green and from 3,000 to end of scale is blue. The front glass lens is made to act as a pressure relief valve. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape. Pressure gauge is equipped with a 7/16 threaded high-pressure hose.

The instrument console is made in Italy. Complete Scuba Life Support System. Regulator, Octopus, BCD and Analog Gauge Console. Designed Primarily as Rental BC for Resorts and Dive Schools.

Strong Enough to Rent Bullet-Proof Construction for Recreational Divers. Stability of a Jacket Style BC. 1000 and 500 Denier Cordura Construction. Large, Easily-Seen Size Markings on Shoulder. 2 Large Cargo Pockets with hook and loop Closures.

Plastic D-Rings for Accessory Attachment. Rigid Padded Backpack and Carry Handle: Stability and Ease of Transport. Buoyancy Control: 3-Exhaust/Overpressure Relief Valves 2-Vlaves with Pull Dump Handle (Right Shoulder/Lower Rear) Cressi's Power Inflator with Cable Activated Pull Dump 3/8 Threaded Low Pressure Quick-Disconnect Hose.

Adjustable Waist Strap with Cummerbund Pad for Comfort. All Straps Equipped w/Squeeze-Style Side-Release Buckles for Quick/Easy Donning & Doffing. Lift Capacities: 29.2 lbs. (13.25 kg to 20.4 kg) Size Dependent. Lightweight Jacketed 3/8 Threaded Low Pressure (LP) Hose.

First Stage:Cressi AC2 Regulator. Fail-Safe Design Delivers Gas Even if First Stage Fails. Construction: Durable Marine Grade Chromed Brass. 1 HP Port 7/16 Thread. 4 LP Ports 3/8 Thread. Second Stage:Cressi XS2 Compact Regulator. Dependable Downstream Demand Valve Mechanism for Reliable Performance. Venturi Dive/Pre-Dive Switch Prevent Free-Flow when Not in Use. 33" (84cm) 3/8" Threaded Hose.

Yellow Front Cover for Easy Identification in an Out-of-Air-Emergency. Housing: Hi-Tech Polymer Material for Strength and Durability.

Soft and Comfortable Liquid Silicone Mouthpiece. Weight (w/Hose): 12.7 oz. Certified to Annex B EN 250.2014 Standards. Cressi Mini 2 Gauge Console (Imperial). Small, Modern Shaped Console Boot. Boot Material: Durable Polycarbonate and Desmopan, (a Thermoplastic Polyurethane). Protection from Shocks, Scratches and Very Lightweight. Eyelets for Fastening Instrument to BCD or Harness with Clip or Lanyard. 0' to 230' Gauge Scale. Maximum Depth Indicator, Extremely Handy for Logging Dive Information.

0' to 40' of Depth: 10' Increments, Widely Spaced for Ease-of-Reading. Face Divided into 3-Different Colored Zones: Green Up to 66' Light-Blue from 66' to 120' Red from 120' to 230. 0 to 5000 psi Gauge Scale.

Unique Glass Lens Pressure Relief Valve. Colored Zones: 0 to 600 psi Highlighted-in-Red, Solid-Bar and Red Stripes Deeper Dives Reserve; Red-Scale Extends and Fades to 1,300 psi Safe Air Zone; 600 psi to Approximately 3,000 psi Green and 3,000 psi to Full Scale is Blue. 4 LP Ports, 3/8 Thread. 1 HP Port, 7/16 Thread.

First Stage: Chromed Brass Second Stage: Polymer Plastic, Silicone Rubber. (994 g) w/Hose Octopus: 4.76 oz.

(13.25 kg) SM: 31.5 lbs. (14.29 kg) MD: 33.7 lbs.

(15.29 kg) LG: 38.2 lbs. (17.33 kg) XL: 45 lbs. Right Shoulder & Lower Rear Over-Pressure Relief/Pull Dump Valve Left Shoulder Cable Activated Pull Dump. 2-Pockets w/Hook and Loop Closures. Adjustable Torso Straps w/Squeeze-Style Side Release Buckles. Adjustable Waist Strap w/Squeeze-Style Side Release Buckle and Cummerbund Pad.

Yes, Adjustable Sternum w/Squeeze-Style Side Release Buckle. Cressi Power Inflator w/Cable-Activated Pull Dump. Internally Urethane Laminated 1000 and 500 Denier Cordura. 0 to 5,000 psi. Feedback is a very powerful tool.

It gives sellers a reason to conduct business at the highest level of honesty & respect. Many years ago Leisure Pro was the first Internet-based divers supply company. We're still the number one store for scuba diving and snorkeling equipment. Thousands and thousands of satisfied customers swear by our service. Hours: Mon-Thu: 9:30-5:30, Friday: 9:30-12:30. Please do not request to have an item relisted if you do not see it any more.

If we are able to relist, we will do so even without your request. We will not mark any package as a gift. You will get that automatically. Then, we give another 90 days (120 days from the date of invoice) to return for store credit.

We won't even ask why you've changed your mind. Please wait 8 days from date we received the package for us to process your return.

Ate we received the package for us to process your return. The item "Cressi Start Equipment for Scuba Diving" is in sale since Wednesday, October 23, 2019. This item is in the category "Sporting Goods\Water Sports\Scuba & Snorkeling\Buoyancy Compensators". The seller is "leisurepro" and is located in Elizabeth, New Jersey. This item can be shipped to United States.

  • Brand: Cressi
  • MPN: Does not apply
  • Manufacturer: Cressi


Cressi Start Equipment for Scuba Diving    Cressi Start Equipment for Scuba Diving