Hollis SMS 100 Side-Mount System BCD

Hollis SMS 100 Side-Mount System BCD. Hollis SMS 100 Side-Mount System BCD with 1 or 2 LP Quick-Disconnect Hose(s) and Owner's Manual. Hollis Gear's SMS100 Side Mount System was designed not just with the side-mount cave divers in mind, but any diver. Whether you are a beginner, advanced or technical diver, this kit was designed for you. The SMS 100 is suitable for side-mounting twin or single cylinders, but also for use with re-breathers or rear mounted singles. This system can be used in any environment from open water to the overhead environment. The system is ready-to-dive out-of-the-box. This bulletproof constructed system allows full visibility over your gear, diver can perform gas checks/management, configure and monitor all gauges, valves and hoses without assistance.

The system reduces additional gear: doubles bands / hardware / manifold - benefit when traveling, aids in transporting gear to and from the beach or boat - one tank at a time. This includes exiting the water on a boat dive. The system streamlines profile which in turn reduces drag increasing your bottom time. The SMS100 Side-Mount System Harness comes equipped with 6-stainless-steel D-rings on the padded shoulder straps with 4-pre-bent for accessory attachment. The harness has adjustable shoulder and sternum straps equipped with squeeze-style side-release buckles for easy donning and doffing.

The Hollis SMS100 Harness has a stainless-steel latch-style waist buckle with adjustable crotch strap. The crotch strap is equipped with an additional stainless-steel D-rings for attachment of accessory or scooter. All hardware is manufactured from 316- marine-grade stainless-steel. The Hollis SMS100 Side-Mount System, bladder with inflator mechanism and overpressure relief/dump valve, is a 360° elastic bungee system (removable) wing that provides 52 lbs.

(23.6 kg) of lift capacity. Bladder has a centrally located inflator mechanism elbow to avoid tank valve/regulator interference, lower left pull dump/overpressure relief valve (on single wing) and lower left and right (dual wing) and the inflator system is made from durable impact resistant plastic with a corrugated rubber hose. The internal components and inlet quick-disconnect nipple are made from chrome plated brass. The SMS 100 Wing is equipped with upper and lower cam band slots for single cylinder mounting.

This bulletproof constructed wing is manufactured using 1000-denier Cordura nylon with a polyurethane lamination outer shell & 15mm urethane internal bladder(s). The SMS 100 bladder is streamlined designed for reduced drag and passing through confined spaces. Included with the wing is a 3/8 threaded low-pressure quick-disconnect hose (or 2 with redundant dual wing) and an owner's manual. System Uses: Any-Environment from Open-Water to Overhead Environment. Designed for: Side-Mount Cave Divers Beginner, Advanced or Technical Divers. Suitable for: Side Mounting Twin or Single Cylinders Re-Breathers or Rear Mounted Singles. Bulletproof Constructed System Allows Full Visibility Over-your-Gear. Diver Can Perform: Gas Checks/Management Configure-and-Monitor All Gauges Valves and Hoses w/o Assistance. System Reduces Additional Gear: Doubles Bands Hardware Manifold Benefit when Traveling.

Aids in Transporting Gear: To-and-From Beach or Boat - 1-Tank-At-A-Time. Streamlines Profile: Reduces Drag, Increasing Bottom Time. Accessory Attachment Points: 6-Stainless-Steel D-Rings on Padded Shoulder Straps 4-Pre-Bent for Accessory Attachment. Adjustable Shoulder and Sternum Straps. Shoulder and Sternum Straps: Squeeze-Style Side-Release Buckles for Easy Donning and Doffing.

Waist Strap: Stainless-Steel Latch-Style Buckle. Adjustable Crotch Strap: Additional Stainless-Steel D-Rings for Attachment of Accessory or Scooter. All Hardware Manufactured from 316- Marine-Grade Stainless-Steel. 360° Degree Elastic Bungee System (removable) Wing. (23.6 kg) of Lift Capacity. Available with Single or Dual Wing (Redundant System). Centrally-Located Inflator Mechanism Elbow(s): Avoid Tank Valve/Regulator Interference. Lower Left Pull Dump/Overpressure Relief Valve (on Single Wing). Lower Left and Right Pull Dump/Overpressure Relief Valves (Dual Wing). Hollis Power Inflator System(s): Durable Impact Resistant Plastic w/Corrugated Rubber Hose(s) Internal Components & Inlet Quick-Disconnect Nipple; Corrosion Resistant Chrome Plated Brass. 3/8 Threaded Low-Pressure Quick-Disconnect Hose(s). Dual Cam Band Slots for Single Cylinder Mounting. 1 Or 2 Pull Dump/Overpressure Relief Valves. Torso Adjustable With "Squeeze-Style" Side-Release Buckles.

2' (5Cm) Nylon Webbing With Stainless Steel "Latch-Style" And Integrated Crotch Strap. Yes, Adjustable Sternum With "Squeeze-Style" Side-Release Buckle. 1 Or 2-Hollis Gear Power Inflator Mechanism. Outer Bag: 1000-Denier Cordura, Inner Bladder: 15Ml Urethane, Harness: Nylon Webbing And 316-Marine-Grade Stainless Steel, Plastic. Feedback is a very powerful tool.

It gives sellers a reason to conduct business at the highest level of honesty & respect. Many years ago Leisure Pro was the first Internet-based divers supply company. We're still the number one store for scuba diving and snorkeling equipment.

Thousands and thousands of satisfied customers swear by our service. Hours: Mon-Thu: 9:30-5:30, Friday: 9:30-12:30. Please do not request to have an item relisted if you do not see it any more. If we are able to relist, we will do so even without your request. We will not mark any package as a gift.

You will get that automatically. Then, we give another 90 days (120 days from the date of invoice) to return for store credit. We won't even ask why you've changed your mind. Please wait 8 days from date we received the package for us to process your return.

The item "Hollis SMS 100 Side-Mount System BCD" is in sale since Tuesday, May 1, 2018. This item is in the category "Sporting Goods\Water Sports\SCUBA & Snorkeling\Buoyancy Compensators".

The seller is "leisurepro" and is located in Elizabeth, New Jersey. This item can be shipped to United States.

Brand: Hollis
MPN: Does not apply
Manufacturer: Hollis
Gear Type: Sidemount
Country/Region of Manufacture: China